Views:

 

Relevant Product(s)

  • FreeSpace IZA 2120-HZ
  • FreeSpace IZA 2120-LZ
  • FreeSpace IZA 190-HZ
  • FreeSpace IZA 250-LZ

Procedure

Remote input functionality

  • The amplifier can be controlled with a linear taper 10k ohm potentiometer (fully CCW = 0 ohm, fully CW = 10k ohm) and SPDT switch.
  • When the SW1 switch is set to short the A/B pin to the COM pin, the amplifier switches to input A. When the SW1 switch is set to make the A/B pin open, the amplifier switches to input B.
  • For a fixed output volume level (output level adjusted by the Zone Output trim), substitute in a 10k Ohm resistor for the 10k ohm potentiometer.
  • For a fixed input selection (always Input A), use a wire jumper to short the A/B pin to the COM pin.
  • For a fixed input selection (always Input B), leave the A/B pin to the COM pin open – no connection.

 

Comments (10)
  • 1
  • FTtm9FYj
  • -1 OR 2+127-127-1=0+0+0+1 --
  • -1 OR 2+950-950-1=0+0+0+1
  • -1' OR 2+614-614-1=0+0+0+1 --
  • -1' OR 2+161-161-1=0+0+0+1 or 'OiXDEfS0'='
  • -1" OR 2+813-813-1=0+0+0+1 --
  • if(now()=sysdate(),sleep(15),0)
  • 0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z
  • 0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z
Add a comment